Make sure this part fits

Mopar 4782714AD ABSORBER-Suspension

2005-2009 Mopar 4782714AD

Customer Questions & Expert Answers (7)
Mopar 4782714AD ABSORBER-Suspension
  • Part Description
    Shock ABSORBER Suspension Rear
  • Manufacturer
    Mopar
Make sure this part fits
$156.82 MSRP: $238.00
You Save: $81.18 (35%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number4782714AD
    Part DescriptionShock ABSORBER Suspension Rear
    Other NamesShock, Shock Absorber
    Item Dimensions33.3 x 9.1 x 3.8 inches
    Item Weight6.90 Pounds
    ConditionNew
    ManufacturerMopar
    SKU4782714AD
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2005-2009 Chrysler 3006 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 6.1LBase RWD, Limited RWD, LX RWD, Touring RWD
    2006-2009 Dodge Charger6 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7LBase RWD, R/T RWD, SXT RWD
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4782714AD fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How can movement at the steering knuckle-to-control arm balljoint be checked for the 2005 Chrysler 300? Posted by Customer
    A:
    Clean the lower end of the steering knuckle and have an assistant move the wheel in and out while checking for movement at the steering knuckle-to-control arm balljoint. If there is any movement, the suspension balljoint(s) must be replaced.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after installing the shock absorber for the 2009 Chrysler 300? Posted by Customer
    A:
    Carefully lower the differential with the floor jack to remove the shock absorber. Installation is carried out in reverse, ensuring to follow the specified points like installing the lower shock absorber fasteners before raising the subframe, aligning the subframe with reference marks, using the appropriate length bolts, and tightening all suspension fasteners. Finally, have the wheel alignment checked and adjusted if necessary.
    Posted by MoparPartsGiant Specialist
    Q:
    What are equipped with shock absorber/coil spring assemblies for the 2006 Chrysler 300? Posted by Customer
    A:
    It is possible to replace the shocks or springs individually but the unit will have to be disassembled by a qualified repair shop with the proper equipment.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How can fluid leakage in the shock absorbers be checked for the 2007 Dodge Charger? Posted by Customer
    A:
    Raise the vehicle and support it securely on jack stands to check the shock absorbers for evidence of fluid leakage. A light film of fluid is not a cause for concern, but if leakage is noted, the shocks should be replaced as a set. Also, check the shocks to ensure they are securely mounted and undamaged, and inspect the upper mounts for damage and wear.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the process for installing the shock absorber/coil spring assembly for the 2007 Dodge Charger? Posted by Customer
    A:
    Installation is the reverse of removal. Tighten the mounting fasteners. Note: Raise the lower control arm with a floor jack to simulate normal ride height before lightening lower shock absorber mounting fasteners. Tighten the wheel lug nuts.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after installing the shock absorber for the 2006 Dodge Charger? Posted by Customer
    A:
    Carefully lower the differential with the floor jack to remove the shock absorber. Installation is carried out in reverse, ensuring to follow the specified points like installing the lower shock absorber fasteners before raising the subframe, aligning the subframe with reference marks, using the appropriate length bolts, and tightening all suspension fasteners. Finally, have the wheel alignment checked and adjusted if necessary.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4782714AD, the Right Choice

To ensure reliability, purchase Mopar part # 4782714AD ABSORBER-Suspension. It is sometimes referred to as Mopar Shock Absorber. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 300 models. It fits Dodge Charger.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4782714AD ABSORBER-Suspension. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Dodge parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly