Make sure this part fits

Mopar 68065447AA Steering Knuckle, Front

2010-2013 Mopar 68065447AA

Customer Questions & Expert Answers (5)
Mopar 68065447AA Steering Knuckle, Front
  • Part Description
    Knuckle-Front
  • Position
    Front
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number68065447AA
    Part DescriptionKnuckle-Front
    Other NamesKnuckle
    Item Dimensions13.4 x 13.1 x 6.4 inches
    Item Weight22.70 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU68065447AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2010 Dodge Ram 25006 Cyl 6.7L Diesel, 8 Cyl 5.7LLaramie Crew Cab 4WD, Laramie Mega Cab 4WD, SLT Crew Cab 4WD, SLT Mega Cab 4WD, SLT Regular Cab 4WD, ST Crew Cab 4WD, ST Regular Cab 4WD
    2010 Dodge Ram 35006 Cyl 6.7L DieselLaramie Crew Cab 4WD, Laramie Mega Cab 4WD, Quad Cab Chassis 2WD, Quad Cab Chassis 4WD, Regular Cab Chassis 2WD, Regular Cab Chassis 4WD, SLT Crew Cab 4WD, SLT Mega Cab 4WD, SLT Regular Cab 4WD, ST Crew Cab 4WD, ST Regular Cab 4WD
    2011-2013 Ram 25006 Cyl 6.7L Diesel, 8 Cyl 5.7LLaramie Crew Cab 4WD, Laramie Mega Cab 4WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 4WD, Power Wagon Crew Cab 4WD, Powerwagon Crew Cab 4WD, SLT Crew Cab 4WD, SLT Mega Cab 4WD, SLT Regular Cab 4WD, ST Crew Cab 4WD, ST Regular Cab 4WD
    2011-2013 Ram 35006 Cyl 6.7L Diesel, 8 Cyl 5.7LCrew Cab Chassis 4WD, Laramie Crew Cab 4WD, Laramie Mega Cab 4WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 4WD, Regular Cab Chassis 4WD, SLT Crew Cab 4WD, SLT Mega Cab 4WD, SLT Regular Cab 4WD, ST Crew Cab 4WD, ST Regular Cab 4WD
  • Customer Questions & Expert Answers

    Q:
    Does this part fit my vehicle? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 68065447AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you install the steering knuckle for the 2010 Dodge Ram 3500? Posted by Customer
    A:
    Installation is the reverse of removal. Tighten all suspension fasteners.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    How do you inspect the steering knuckle for the 2009 Dodge Ram 2500? Posted by Customer
    A:
    Carefully inspect the steering knuckle for cracks, especially around the steering arm and spindle mounting area. Also inspect the balljoint stud holes. if they're elongated, or if you find any cracks in the knuckle, replace the steering knuckle.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    How do you remove the steering knuckle for the 2014 Ram 2500? Posted by Customer
    A:
    Loosen the wheel lug nuts, raise the vehicle and support it securely on jackstands. Remove the wheel. On 4WD models, unscrew the driveaxle/hub nut with a socket and large breaker bar. Brace a large prybar across two of the wheel studs or insert a large screwdriver through the center of the brake caliper and into the disc cooling vanes to prevent the hub from turning as the nut is loosened. Remove the disc brake caliper and disc. If equipped, disconnect the electrical connector from the wheel speed sensor and remove the sensor. Disconnect the tie-rod from the steering knuckle. Remove the driveaxle/hub nut. Support the lower control arm with a floor jack. Separate the lower control arm from the steering knuckle. Separate the upper control arm from the steering knuckle. Remove the knuckle.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    How do you inspect the steering knuckle for the 2011 Ram 3500? Posted by Customer
    A:
    Carefully inspect the steering knuckle for cracks, especially around the steering arm and spindle mounting area. Also inspect the balljoint stud holes. if they're elongated, or if you find any cracks in the knuckle, replace the steering knuckle.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 68065447AA, the Right Choice

To ensure reliability, purchase Mopar part # 68065447AA Steering Knuckle, Front. It is sometimes referred to as Mopar Steering Knuckle. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Dodge Ram 2500, Ram 3500 models. It fits Ram 2500, 3500.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 68065447AA Steering Knuckle, Front. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Ram parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly