Make sure this part fits

Mopar 4895518AE Shock-Suspension

2007-2008 Mopar 4895518AE

Customer Questions & Expert Answers (7)
Mopar 4895518AE Shock-Suspension
  • Part Description
    Shock ABSORBER Suspension
  • Replaced By
    5180998AA
  • Manufacturer
    Mopar
Make sure this part fits
$199.66 MSRP: $295.00
You Save: $95.34 (33%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number4895518AE
    Part DescriptionShock ABSORBER Suspension
    Item Dimensions14.3 x 3.1 x 3.0 inches
    Item Weight2.10 Pounds
    ConditionNew
    ManufacturerMopar
    SKU4895518AE
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2007-2008 Chrysler 3006 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1LBase RWD, C RWD, C SRT8 RWD, Limited RWD, LX RWD, Touring RWD
    2007-2008 Dodge Charger6 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1LBase RWD, R/T RWD, SRT8 RWD, SXT RWD
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4895518AE fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be inspected when removing the shock absorber/coil spring assembly for the 2009 Chrysler 300? Posted by Customer
    A:
    Inspect the shock absorber for leaking fluid, dents, cracks and other damage. Inspect the coil spring for chips and cracks which could cause premature failure. Inspect the spring seats for hardness and general deterioration.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What components should be visually inspected for damage and distortion in the steering and suspension check for the 2006 Chrysler 300? Posted by Customer
    A:
    In the steering and suspension check, visually inspect the components for damage and distortion, including seals, boots, bushings, and leaks. Examine the bushings where the control arms meet the chassis, the tie-rod ends, the ball joints, and the steering gear boots.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you start servicing regular shock absorbers for the 2009 Chrysler 300? Posted by Customer
    A:
    Start by raising the rear of the vehicle and supporting it securely on jackstands. Remove the wheel and support the spring link with a floor jack. Remove the fasteners attaching the upper end of the shock absorber to the frame and then remove the fasteners at the lower end.
    Posted by MoparPartsGiant Specialist
    Q:
    What are equipped with shock absorber/coil spring assemblies for the 2007 Dodge Charger? Posted by Customer
    A:
    It is possible to replace the shocks or springs individually but the unit will have to be disassembled by a qualified repair shop with the proper equipment.
    Posted by MoparPartsGiant Specialist
    Q:
    How can the shock absorbers be checked for the 2007 Dodge Charger? Posted by Customer
    A:
    To check the shock absorbers, park the vehicle on level ground, turn off the engine, and set the parking brake. Push down at one corner of the vehicle and release it, noting the movement of the body. It should stop moving and come to rest in a level position within one or two bounces. If the vehicle continues to move up and down or fails to return to its original position, a worn or weak shock absorber is likely the reason. Repeat this check at each of the three remaining corners of the vehicle.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you start servicing regular shock absorbers for the 2008 Dodge Charger? Posted by Customer
    A:
    Start by raising the rear of the vehicle and supporting it securely on jackstands. Remove the wheel and support the spring link with a floor jack. Remove the fasteners attaching the upper end of the shock absorber to the frame and then remove the fasteners at the lower end.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4895518AE, the Right Choice

To ensure reliability, purchase Mopar part # 4895518AE Shock-Suspension. It is sometimes referred to as Mopar Shock Absorber. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 300 models. It fits Dodge Charger.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4895518AE Shock-Suspension. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Dodge parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly