Mopar 4578194AC Support-Engine Support

You can Select Your Vehicle to check if 4578194AC fits your vehicle.

If movement is noted, lower the engine and tighten the mount fasteners. Rubber preservative should be applied to the mounts to slow down deterioration.

For replacement, follow these steps: Disconnect the cable from the negative terminal of the battery. Raise the vehicle and support it securely on jackstands (if not already done). Position a jack under the engine oil pan with a large wood block between the jack head and the oil pan. If you're removing the right side engine mount, remove the alternator support bracket. Remove the engine mount-to-subframe nuts and raise the engine with the jack. Remove the mount-to-engine bracket bolts. Install the new mount, making sure it is correctly positioned in the bracket. Install the fasteners and tighten them securely.

If movement is noted during the mount inspection, lower the engine and tighten the mount fasteners.

During the check, the engine must be raised slightly to remove the weight from the mounts. Raise the vehicle and support it securely on jackstands.

Raising the engine slightly during the check is done to remove the weight from the mounts, allowing for a proper inspection.

After raising the vehicle and securing it on jackstands, remove the front wheels and tires.