×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Dodge Magnum Engine Mount
Engine Motor Mount- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
31 Engine Mounts found
Dodge Magnum Bracket-Transmission Mount
Part Number: 4578062AC$57.57 MSRP: $84.55You Save: $26.98 (32%)
Dodge Magnum Support-Engine Support
Part Number: 4578044AC$146.64 MSRP: $220.00You Save: $73.36 (34%)
Dodge Magnum Support-Engine Support
Part Number: 4578044AD$146.64 MSRP: $220.00You Save: $73.36 (34%)
Dodge Magnum Support-Engine Support
Part Number: 4578193AD$127.46 MSRP: $190.00You Save: $62.54 (33%)
| Page 1 of 2 |Next >
1-20 of 31 Results
Dodge Magnum Engine Mount
The Engine Mount in Dodge Magnum vehicles serves two primary functions: it muffles noise and vibration occasioned by the running of the engine and anchors and positions the engine optimally within the carrioage. This is very important for achieving comfortable rides also for other purposes such as to avoid damaging certain components in the vehicle as the car is on the road. Engine Mounts used in Dodge Magnum cars include the conventional rubber and fluid filled hydraulic mounts and highly developed active electronic mounts. Typical types of mounts are made from metal parts with rubber separators while the hydraulic type have higher damping coefficients and therefore provides better isolation of the vibrations. In the electronic active mounts for optimum support and to minimize the vibrations the stiffness also vary according to the engine RPM. Eventually, these Engine Mounts can wear out because of age, heat, or fluids and the driver may begin to experience peculiarities such as unusual noise and vibration and therefore requires its inspection and replacement if needed.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Magnum Engine Mount at great affordable prices. Moreover, all genuine Dodge Magnum Engine Mount come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Magnum Engine Mount Parts Questions & Experts Answers
- Q: How to check and replace powertrain mounts in V8 engine on Dodge Magnum?A: There are three powertrain mounts; the left and right ones attach to the engine block, subframe and the engine block while a rear one is attached to the transmission and the frame. During testing, the mounts must have no weight on them so that the engine should be slightly lifted. Raise vehicle and secure it with jack stands then place a jack under engine oil pan. Place a huge wood block between jack head and oil pan, then lift up carefully just enough to remove weight from mount. Look for cracked or hardened rubber or separation of rubber from metal center in mount insulators. Check for movement between mount and engine or subframe. Make use of large screwdriver or prybar to see if those mounts can move. Lower engine if movement is detected, then tighten mount fasteners.Disconnect cable from negative terminal of battery for replacement.Raise vehicle and support it securely on jackstands (if not already done).Position a jack under the engine oil pan.Place a large wood block between the jack head and the oil pan.If you're taking out right side mount (which includes alternator support bracket), disconnect alternator support bracket.Remove nuts securing subframe to engine mount and raise engine by using this jack.Remove bolts holding mounting bracket to motor.Align new mount correctly in bracket before installing.Securely tighten fasteners after they've been installed.
Related Dodge Magnum Parts
Dodge Magnum Exhaust Manifold
Dodge Magnum Engine Cover
Dodge Magnum Exhaust Manifold Gasket
Dodge Magnum Engine Cooling Fan
Dodge Magnum Engine Mount Bracket
Dodge Magnum Exhaust Clamp
Dodge Magnum Exhaust Hanger
Dodge Magnum Exhaust Heat Shield
Dodge Magnum Exhaust Nut