×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Chrysler Cirrus Evaporator
A/C Evaporator Core- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Evaporators found
Chrysler Cirrus Evaporator
The Evaporator in Chrysler Cirrus vehicle is one of the main parts that remove heat for the vehicle cabin air conditioning system. Sited underneath the dashboard, it works with the aid of the air flow over the metal fins of aluminum while converting from liquid to vapor the refrigerant. In doing so it not only cools the air, but evaporatively cools and dehumidifies it, and this you will typically see water pooling around the vehicle. The Chrysler Cirrus Evaporators are mostly formed from aluminum materials and the evaporators consist of few tubes some of which are covered with fins. It may necessitate change because they often have cracked septic systems and are susceptible to leaking because of age, frequent change of temperatures as well as build up of debris that may lead to corrosion. The main work of the Evaporator does not differ significantly from one model to another and is centered on absorbing heat and eliminating moisture so that the owner of Chrysler Cirrus automobiles drives in comfort.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Cirrus Evaporator at great affordable prices. Moreover, all genuine Chrysler Cirrus Evaporator come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Chrysler Cirrus Evaporator Parts Questions & Experts Answers
- Q: How to remove and install the evaporator and A/C Expansion Valve on Chrysler Cirrus?A: However, to remove and replace the evaporator in this kind of a model is not an easy thing for those who are technically challenged. This process includes releasing the refrigerant gas from the AC system, disconnecting the passenger airbag system and dealing with several wiring connectors through under dashboard just like removing complete instrument panel assembly. The air conditioning evaporator is enclosed in a two-piece housing which must be removed from beneath the dashboard and then split into two halves. However, expansion valve can be replaced without necessarily removing the evaporator core from vehicle or if required removed together with it. In order to take out the expansion valve you first need to have your system discharged, unfasten the negative battery cable, as well as remove security clips off the refrigerant line quick connect fittings. Subsequently, undo retainer bolts/ screws to separate expansion valve from evaporator unit. To install-start by fitting new o-ring seals on expansion valve lube them with r-134a compatible refrigerant oil before installation; then take vehicle to shop where will evacuate & recharge & leak test system. Similarly for removal of evaporator core first discharge it's system then also disconnect negative battery terminal. At that point flush cooling water out while blocking off water tube connections at heater core end points .Afterward take apart air distribution assembly; pull out electrical harnesses joining wires onto them; unbolt ac/heater box & carefully lift it out of vehicle interior space. Remove the evaporator probe, recirculating door inlet cover, clips retaining the housing sections together, and the evaporator tube inlet seal.To remove the evaporator core from its housing, finally remove it out. On installation- at last, reverse steps of disassembly using a new gasket on expansion valve as well as reinstalling the temperature sensor from old core into the new one plus when installing a new evaporator adds one ounce of fresh r-134a compatible refrigerant oil. Take it to a shop and have the system evacuated, recharged and leak tested.
