How to Replace the Camshaft Position Sensor,Coolant Temperature Sensor,Knock Sensor,MAP Sensor,Oxygen Sensor,Speed Sensor and Throttle Position Sensor on Chrysler Imperial?

To remove the camshaft reference sensor on 3.3L and 3.8L models, detach the sensor lead, loosen the bolt, and remove the sensor. If reusing, clean the sensor face and replace the spacer and O-ring. To install a new sensor, ensure it has a paper spacer and mount the O-ring. For the charge temperature sensor, unplug the connector, replace the sensor, and secure it with tape. For the coolant sensor, replace the cap, and the sensor, and check the coolant level. For the crankshaft sensor, unplug the connector, loosen the bolt, remove the sensor, and replace the spacer if reusing. For the TPS, check resistance readings, and replace if it is incorrect.

Genuine Chrysler Imperial Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Coolant Temperature Sensors found

View related parts
Chrysler Imperial Sensor-COOLANT Temperature
Part Number: 33004281
$40.26 MSRP: $60.15
You Save: $19.89 (34%)
ADD TO CART
Product Specifications
- Other Name: Coolant Temp. (Use Insul. 4414901)
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1992-1993 Chrysler Imperial | Base | 6 Cyl 3.8L
View related parts
Chrysler Imperial Sensor-COOLANT Temperature
Part Number: 5226374
$74.84 MSRP: $111.00
You Save: $36.16 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Eng. Temp.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-1993 Chrysler Imperial | Base | 6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Chrysler Imperial Sensor COOLANT Duel THERM
Part Number: 5226356
$24.37 MSRP: $31.01
You Save: $6.64 (22%)
ADD TO CART
Product Specifications
- Other Name: Sensors; Fan Switch, Sensor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990 Chrysler Imperial | 6 Cyl 3.3L
View related parts
Chrysler Imperial Sensor-Temperature Sending Unit
Part Number: 4504203
Product Specifications
- Other Name: Sending Unit, Eng. Temp.; Temperature Sending Unit
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-1993 Chrysler Imperial | Base | 6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.8L

Chrysler Imperial Coolant Temperature Sensor

The Coolant Temperature Sensor encountered in Chrysler Imperial car is important in observing the coolant temperature and make certain the car's engine is functioning as expected. The role of the sensor is in knowing the current temperature of the coolant to keep the efficiency and performance of the automobile engines intact. Chrysler Imperial for years has applied different Types of Coolant Temperature Sensors where each of them serves the required purpose of monitoring the temperature variation of the coolant but at times comes with variations in the technology used. These variations may include, variations in sensitivity or response time - that may affect the capability of the sensor in relaying temperature variations to the Engine Control Unit. Al in all, Coolant Temperature Sensor still stands as a significant factor of the Chrysler Imperial series of products regarding engine management and performance.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Imperial Coolant Temperature Sensor at great affordable prices. Moreover, all genuine Chrysler Imperial Coolant Temperature Sensor come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler Imperial Coolant Temperature Sensor Parts Questions & Experts Answers

Sensor-COOLANT Temperature
33004281
Q: How to Replace the Camshaft Position Sensor,Coolant Temperature Sensor,Knock Sensor,MAP Sensor,Oxygen Sensor,Speed Sensor and Throttle Position Sensor on Chrysler Imperial?
A: To remove the camshaft reference sensor on 3.3L and 3.8L models, detach the sensor lead, loosen the bolt, and remove the sensor. If reusing, clean the sensor face and replace the spacer and O-ring. To install a new sensor, ensure it has a paper spacer and mount the O-ring. For the charge temperature sensor, unplug the connector, replace the sensor, and secure it with tape. For the coolant sensor, replace the cap, and the sensor, and check the coolant level. For the crankshaft sensor, unplug the connector, loosen the bolt, remove the sensor, and replace the spacer if reusing. For the TPS, check resistance readings, and replace if it is incorrect.