How do you disconnect and install the CMP sensor and target magnet on Chrysler PT Cruiser?

Disconnect the cable from the negative terminal of the battery, then disconnect the CMP sensor electrical connector. Remove the CMP sensor retaining bolts and take out the CMP sensor. Next, remove the screw that attaches the target magnet to the camshaft and then take out the target magnet. When installing the target magnet, ensure that the locating dowels on the back of the magnet are aligned with the locating holes in the end of the camshaft, and tighten the target magnet retaining screw to the specified torque. The installation process is the reverse of removal, making sure to tighten the CMP sensor retaining bolts to the specified torque.

Genuine Chrysler PT Cruiser Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Camshaft Position Sensors found

View related parts
Chrysler PT Cruiser Sensor-CAMSHAFT
Part Number: 5175762AA
$164.35 MSRP: $250.00
You Save: $85.65 (35%)
ADD TO CART
Product Specifications
- Other Name: Sensor Camshaft; Camshaft Position Sensor, Camshaft Sensor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler PT Cruiser | Limited, Touring, Touring Convertible
View related parts
Chrysler PT Cruiser SENSORPKG-CAMSHAFT
Part Number: 4882851AB
$82.92 MSRP: $126.00
You Save: $43.08 (35%)
ADD TO CART
Product Specifications
- Other Name: Sensor Package Camshaft
- Replaced by: 5093508AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler PT Cruiser | Base, Limited, Touring | 4 Cyl 2.4L
View related parts
Chrysler PT Cruiser SENSORPKG-CAMSHAFT
Part Number: 5093508AA
$89.41 MSRP: $126.00
You Save: $36.59 (30%)
ADD TO CART
Product Specifications
- Other Name: Sensor Package Camshaft; Camshaft Position Sensor, Camshaft Sensor
- Replaces: 4882851AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2010 Chrysler PT Cruiser | Base, Base Convertible, Classic, GT, GT Convertible, LX, Limited, Touring, Touring Convertible | 4 Cyl 2.4L
View related parts
Chrysler PT Cruiser Sensor-CAMSHAFT
Part Number: 5080346AA
$199.00 MSRP: $298.00
You Save: $99.00 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor Camshaft; Camshaft Position Sensor
- Replaced by: 68407876AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chrysler PT Cruiser | Limited, Touring, Touring Convertible
View related parts
Chrysler PT Cruiser Sensor-CAMSHAFT
Part Number: 5293161AA
Product Specifications
- Other Name: Sensor Camshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2007 Chrysler PT Cruiser | Limited, Touring, Touring Convertible

Chrysler PT Cruiser Camshaft Position Sensor

Camshaft Position Sensor in Chrysler PT Cruiser cars is significant which is used to measure the position and the rate of the camshaft. This information is communicated to the engine control module (ECM): the device that controls the fuel injectors and ignition duration for the engine to work most efficiently. In most Chrysler PT Cruiser cars, the Camshaft Position Sensor is installed above the said camshaft, although, it might have slight modification depending on the certain vehicle designs. Altogether with the crank sensor, the Camshaft Position Sensor helps to maintain the correct coordination of all the operations in the engine, especially in vehicles that have been designed with variable valve timing. Both of these elements have to be synchronized to provide the right amount of fuel at the correct time as well as enhance the overall performance of the engine. Taking care of the Camshaft Position Sensor is very important as any form of damage will lead to a serious problem with the Chrysler PT Cruiser.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler PT Cruiser Camshaft Position Sensor at great affordable prices. Moreover, all genuine Chrysler PT Cruiser Camshaft Position Sensor come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler PT Cruiser Camshaft Position Sensor Parts Questions & Experts Answers

Sensor-CAMSHAFT
5175762AA
Q: How do you disconnect and install the CMP sensor and target magnet on Chrysler PT Cruiser?
A: Disconnect the cable from the negative terminal of the battery, then disconnect the CMP sensor electrical connector. Remove the CMP sensor retaining bolts and take out the CMP sensor. Next, remove the screw that attaches the target magnet to the camshaft and then take out the target magnet. When installing the target magnet, ensure that the locating dowels on the back of the magnet are aligned with the locating holes in the end of the camshaft, and tighten the target magnet retaining screw to the specified torque. The installation process is the reverse of removal, making sure to tighten the CMP sensor retaining bolts to the specified torque.