Mopar 5093508AA SENSORPKG-CAMSHAFT

You can Select Your Vehicle to check if 5093508AA fits your vehicle.

If reinstalling the same sensor, remove the paper spacer from the end of the sensor. Remove the old O-ring from the CMP sensor. If installing the old CMP sensor, clean off the sensor face and install a new paper spacer on the face before installing the sensor. Inspect the old O-ring for damage and replace if necessary. Apply a few drops of clean engine oil to the O-ring, then carefully install the CMP sensor in the timing chain cover and rotate it into position. Installation is otherwise the reverse of removal. Be sure to tighten the CMP sensor mounting bolt to the specified torque.

For the throttle body temperature sensor, remove the air cleaner, disconnect throttle cables, remove the accelerator cable bracket, unplug the electrical connector from the sensor, remove the sensor, apply heat transfer compound, install the sensor securely, and reverse the steps for reinstallation.