How to Replace the Engine Coolant Temperature Sensor on Chrysler Sebring?

Handle the Engine Coolant Temperature (ECT) sensor with care. Damage to the ECT sensor will affect the operation of the entire fuel injection system. 2011 and earlier 2.4L engines have two ECT sensors: Sensor 1 is located at the left end of the engine on the coolant adapter housing; Sensor 2 is located on the right front side of the engine block, above the oil pressure sensor. 2012 and later 2.4L models only have one ECT sensor, located at the left end of the engine on the coolant adapter housing. On 2.7L engines, the ECT sensor is located at the right end of the engine on the coolant outlet housing. On 3.5L engines, the ECT sensor is located at the left end of the engine, near the throttle body and EGR valve. On 3.6L engines, the ECT sensor is threaded into the left front end of the front-bank cylinder head. Disconnect the negative battery cable from the remote ground terminal or battery. Drain the engine coolant to a point lower than that of the sensor. Disconnect the electrical connector from the sensor, then unscrew the sensor. Before installing a threaded ECT sensor, wrap the threads of the sensor with Teflon tape to prevent coolant leakage. Installation is otherwise the reverse of removal. Tighten threaded ECT sensors to the torque. Refill the cooling system.

Genuine Chrysler Sebring Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Coolant Temperature Sensors found

View related parts
Chrysler Sebring Sensor-COOLANT Temperature
Part Number: 56027873
$70.01 MSRP: $107.00
You Save: $36.99 (35%)
ADD TO CART
Product Specifications
- Other Name: Sensor Coolant Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2000 Chrysler Sebring | JX, JXi, LX, LXi | 4 Cyl 2.0L, 4 Cyl 2.4L, 6 Cyl 2.5L
View related parts
Chrysler Sebring Sensor-COOLANT Temperature
Part Number: 5269870AB
$61.64 MSRP: $84.10
You Save: $22.46 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor Coolant Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2008 Chrysler Sebring | Base Convertible, Base Sedan, GTC Convertible, Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, LXi Convertible, LXi Sedan, Touring Convertible, Touring Sedan, TSI Sedan | 4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L
View related parts
Chrysler Sebring Sensor-COOLANT Temperature
Part Number: 5033313AA
$26.91 MSRP: $39.70
You Save: $12.79 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor Coolant Temperature; Coolant Temperature Sensor, Temperature Sensor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 2.7L
View related parts
Chrysler Sebring Sensor-Temperature
Part Number: 5033314AA
$23.44 MSRP: $34.60
You Save: $11.16 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Sedan | 4 Cyl 2.4L
View related parts
Chrysler Sebring COOLANT Temperature
Part Number: 5149096AB
$44.07 MSRP: $65.85
You Save: $21.78 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor Coolant Temperature
- Replaced by: 5149077AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Sedan, Touring Sedan | 6 Cyl 3.5L
View related parts
Chrysler Sebring Sensor-COOLANT Temperature
Part Number: 33004281
$40.26 MSRP: $60.15
You Save: $19.89 (34%)
ADD TO CART
Product Specifications
- Other Name: Coolant Temp. (Use Insul. 4414901)
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chrysler Sebring | JX, JXi, LX, LXi | 4 Cyl 2.0L, 4 Cyl 2.4L, 6 Cyl 2.5L
View related parts
Chrysler Sebring Sensor-COOLANT Temperature
Part Number: MD177572
$31.95 MSRP: $45.20
You Save: $13.25 (30%)
ADD TO CART
Product Specifications
- Other Name: Sensor Coolant Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chrysler Sebring | Base, Limited, LX | 4 Cyl 2.4L, 6 Cyl 3.0L
View related parts
Chrysler Sebring Sensor-Temperature
Part Number: 68001313AA
$20.62 MSRP: $29.75
You Save: $9.13 (31%)
ADD TO CART
Product Specifications
- Other Name: Sensor Temperature
- Replaced by: 68001313AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Sedan
View related parts
Chrysler Sebring Sensor-Temperature
Part Number: 68001313AB
$20.62 MSRP: $29.75
You Save: $9.13 (31%)
ADD TO CART
Product Specifications
- Other Name: Sensor Temperature; Temperature Sending Unit
- Replaces: 68001313AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | LX Convertible, LX Sedan, Limited Convertible, Limited Sedan, Touring Sedan
View related parts
Chrysler Sebring Sensor-COOLANT Temperature
Part Number: MD182467
Product Specifications
- Other Name: Sensor Coolant Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Sebring | LX, LXi | 4 Cyl 2.4L, 6 Cyl 3.0L
- 1995-1996 Chrysler Sebring | LX
View related parts
Chrysler Sebring Sensor-COOLANT Temperature
Part Number: 5149246AA
Product Specifications
- Other Name: Sensor Coolant Temperature; Temperature Sending Unit
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Chrysler Sebring | Limited Sedan, LX Convertible, Touring Sedan | 4 Cyl 2.4L

Chrysler Sebring Coolant Temperature Sensor

The Coolant Temperature Sensor which was installed in Chrysler Sebring vehicles is very important as it assists in the regulation of coolant temperature in the engines. In particular, the sensor measures the coolant's temperature, which in turn allows for maintaining the required levels of the engine performance. Chrysler Sebring in their years of production has installed Several styles of Coolant Temperature Sensors therefore serving the same purpose. While specific differences in design may exist, the primary goal remains consistent: to give the right data concerning the temperatures which are used by the engine management systems. This functionality is of outmost importance in maintaining the general health and operational efficiency of a Chrysler Sebring vehicle, how such a Chrysler Sebring, Coolant Temperature Sensor can have the propensity to impact the automotive engineering field.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Sebring Coolant Temperature Sensor at great affordable prices. Moreover, all genuine Chrysler Sebring Coolant Temperature Sensor come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler Sebring Coolant Temperature Sensor Parts Questions & Experts Answers

Sensor-Temperature
5033314AA
Q: How to Replace the Engine Coolant Temperature Sensor on Chrysler Sebring?
A: Handle the Engine Coolant Temperature (ECT) sensor with care. Damage to the ECT sensor will affect the operation of the entire fuel injection system. 2011 and earlier 2.4L engines have two ECT sensors: Sensor 1 is located at the left end of the engine on the coolant adapter housing; Sensor 2 is located on the right front side of the engine block, above the oil pressure sensor. 2012 and later 2.4L models only have one ECT sensor, located at the left end of the engine on the coolant adapter housing. On 2.7L engines, the ECT sensor is located at the right end of the engine on the coolant outlet housing. On 3.5L engines, the ECT sensor is located at the left end of the engine, near the throttle body and EGR Valve. On 3.6L engines, the ECT sensor is threaded into the left front end of the front-bank cylinder head. Disconnect the negative battery cable from the remote ground terminal or battery. Drain the engine coolant to a point lower than that of the sensor. Disconnect the electrical connector from the sensor, then unscrew the sensor. Before installing a threaded ECT sensor, wrap the threads of the sensor with Teflon tape to prevent coolant leakage. Installation is otherwise the reverse of removal. Tighten threaded ECT sensors to the torque. Refill the cooling system.

Related Chrysler Sebring Parts

Browse by Year