How to Remove the EGR Valve and EGR Tube on Dodge Avenger?

The EGR valve is bolted to the rear end of the rear-bank cylinder head. Remove the EVAP purge solenoid valve and disconnect the electrical connector. Next, remove the lower EGR tube nut from the exhaust manifold and the lower EGR tube bolts from the EGR valve. For the upper EGR tube, remove the two bolts securing the lower end of the pipe to the EGR valve and disconnect the upper end from the intake manifold. Remove the old gasket between the upper pipe and the EGR valve, as well as the old rubber silicone seals from the EGR pipe.

Genuine Dodge Avenger EGR Tube

EGR Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 EGR Tubes found

View related parts
Dodge Avenger Tube-EGR Valve To Intake
Part Number: 4593576AC
$34.36 MSRP: $50.60
You Save: $16.24 (33%)
ADD TO CART
Product Specifications
- Other Name: Tube EGR Valve to Intake; EGR Tube, Tube
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Avenger | Express, Heat, R/T AWD, R/T FWD, SE, SXT | 6 Cyl 3.5L
View related parts
Dodge Avenger Tube-EGR Valve
Part Number: 4891606AD
$237.47 MSRP: $355.00
You Save: $117.53 (34%)
ADD TO CART
Product Specifications
- Other Name: Tube EGR Valve; EGR Tube, Tube
- Replaces: 4891606AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Avenger | Express, Heat, R/T FWD, SE, SXT | 6 Cyl 2.7L
View related parts
Dodge Avenger Tube-EGR Valve
Part Number: 4593693AB
$20.66 MSRP: $30.55
You Save: $9.89 (33%)
ADD TO CART
Product Specifications
- Other Name: Tube EGR Valve; EGR Tube, Tube
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Avenger | Express, Heat, R/T FWD, SE, SXT | 6 Cyl 2.7L
View related parts
Dodge Avenger Pipe, EGR Valve
Part Number: 4591088
Product Specifications
- Other Name: EGR Tube
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Dodge Avenger | Base, ES | 6 Cyl 2.5L
View related parts
Dodge Avenger Tube Exhaust Gas RECIRCULA
Part Number: 4669481
Product Specifications
- Other Name: Tube EGR; EGR Tube
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Dodge Avenger | Base, ES | 4 Cyl 2.0L
View related parts
Dodge Avenger Tube-EGR
Part Number: 5162046AA
Product Specifications
- Other Name: Tube EGR
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Dodge Avenger

Dodge Avenger EGR Tube

In Dodge Avenger vehicles, the EGR Tube serves an important function of limiting the hazardous NOx emissions since it recirculates the exhaust gases back into the engine. This passage assists to sustain the level of the engine's performance and general productivity. Here are certain indications that show that your EGR tube has some issues; rough idle, noises that can be described as a rattle and the check engine light is on. Despite the fact that EGR tubes can differ in design and material, all of them should perform the same tasks, namely, to minimize the emission level and to maintain the proper functioning of an engine. The causes for problems in the EGR system and ways to avoid them: Proper care for the EGR system - The most effective ways to routinely check and maintain the EGR system are to perform the following steps on the car.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Avenger EGR Tube at great affordable prices. Moreover, all genuine Dodge Avenger EGR Tube come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Avenger EGR Tube Parts Questions & Experts Answers

Tube-EGR Valve To Intake
4593576AC
Q: How to Remove the EGR Valve and EGR Tube on Dodge Avenger?
A: The EGR valve is bolted to the rear end of the rear-bank cylinder head. Remove the EVAP purge solenoid valve and disconnect the electrical connector. Next, remove the lower EGR tube nut from the exhaust manifold and the lower EGR tube bolts from the EGR valve. For the upper EGR tube, remove the two bolts securing the lower end of the pipe to the EGR valve and disconnect the upper end from the intake manifold. Remove the old gasket between the upper pipe and the EGR valve, as well as the old rubber silicone seals from the EGR pipe.