How do you remove and install an oil pan on Dodge Daytona?

Remove the bolts securing the oil pan to the engine block, then tap on the pan with a soft-face hammer to break the gasket seal and lift it off. Use a gasket scraper to remove all traces of the old gasket from both the engine block and oil pan, and take out the end seals from the oil seal retainers. Clean the oil pan with solvent and dry it thoroughly, checking the gasket sealing surfaces for distortion. Before installing the oil pan, place new end seals in the oil seal retainers and apply a 3116-inch bead of RTV sealant completely around the oil pan gasket surface of the engine block, including the end seals. Gently lay the oil pan in place, then install the bolts and tighten them to the specified torque, starting with the bolts closest to the center and working out in a criss-cross pattern, ensuring not to overtighten to prevent leakage.

Genuine Dodge Daytona Oil Pan

Oil Drain Pan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Oil Pans found

View related parts
Dodge Daytona Pan-Engine
Part Number: MD189191
$148.54 MSRP: $189.02
You Save: $40.48 (22%)
ADD TO CART
Product Specifications
- Other Name: Pan Engine Oil; Oil Pan
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993 Dodge Daytona | Base, ES, IROC | 6 Cyl 3.0L
View related parts
Dodge Daytona Pan
Part Number: MD110686
Product Specifications
- Other Name: Pan Assembly, Oil; Oil Pan
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-1992 Dodge Daytona | Base, ES, IROC | 6 Cyl 3.0L
View related parts
Dodge Daytona Pan Oil Partial
Part Number: 4343620
Product Specifications
- Other Name: Pan, Oil; Oil Pan
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1986-1988 Dodge Daytona | 4 Cyl 2.5L
View related parts
Dodge Daytona OILPAN-Oil-W/LINERS Paint E-Coat
Part Number: 4621159
Product Specifications
- Other Name: Pan, Oil Partial w/Liners Painted EDF Engine; Oil Pan
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1992-1993 Dodge Daytona | Base, ES, IROC, IROC R/T | 4 Cyl 2.2L
View related parts
Dodge Daytona OILPAN-Partial W/LIN Paint E Coat
Part Number: 4621160
Product Specifications
- Other Name: Pan, Oil Partial w/Liners Painted; Oil Pan
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-1993 Dodge Daytona | Base, ES, IROC, IROC R/T | 4 Cyl 2.2L, 4 Cyl 2.5L
View related parts
Dodge Daytona Pan-Assembly-Oil Partial In White
Part Number: 4387338
Product Specifications
- Other Name: Pan, Oil Partial (Deep Well)
- Replaced by: 4387827
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1988 Dodge Daytona | 4 Cyl 2.2L
View related parts
Dodge Daytona Pan-Assembly-Oil Partial (PNTD)
Part Number: 4387827
Product Specifications
- Other Name: Pan, Oil Partial w/dimple (Except Deep Well); Oil Pan, Tension Pulley
- Replaces: 4387338
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987-1988 Dodge Daytona | 4 Cyl 2.2L

Dodge Daytona Oil Pan

The Oil Pan in Dodge Daytona cars is basically a storage section that holds and supply the vehicle engine with oil to enable it reduce heat and friction upon the contacting of its parts. Vica versa, a wet sump system is incorporated in the Oil Pan, which collects oil pumped through a pickup tube by the oil pump, for circulation within the engine before it returns to the Pan. This design is necessary to keep the engine efficient, which is bearing emphasis as the means for propelling the tanks. conventional Dodge Daytona Oil Pans were mostly produced from stamped steel but with the progression of technology, there has been the incorporation of cast aluminum in most of the current engines to give the optimal of both durability and efficiency. However, the basic function stays this way while the shift to more complex materials symbolizes the up gradation of engineering standards among the Dodge Daytona series.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Daytona Oil Pan at great affordable prices. Moreover, all genuine Dodge Daytona Oil Pan come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Daytona Oil Pan Parts Questions & Experts Answers

Pan-Assembly-Oil Partial In White
4387338
Q: How do you remove and install an oil pan on Dodge Daytona?
A: Remove the bolts securing the oil pan to the engine block, then tap on the pan with a soft-face hammer to break the gasket seal and lift it off. Use a gasket scraper to remove all traces of the old gasket from both the engine block and oil pan, and take out the end seals from the oil seal retainers. Clean the oil pan with solvent and dry it thoroughly, checking the gasket sealing surfaces for distortion. Before installing the oil pan, place new end seals in the oil seal retainers and apply a 3116-inch bead of RTV sealant completely around the oil pan gasket surface of the engine block, including the end seals. Gently lay the oil pan in place, then install the bolts and tighten them to the specified torque, starting with the bolts closest to the center and working out in a criss-cross pattern, ensuring not to overtighten to prevent leakage.