×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Dodge Durango Sway Bar Bushing
Stabilizer Sway Bar Bushing- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
22 Sway Bar Bushings found
Dodge Durango BUSHING-STABILIZER Bar
Part Number: 52855534AA$29.06 MSRP: $42.95You Save: $13.89 (33%)
| Page 1 of 2 |Next >
1-20 of 22 Results
Dodge Durango Sway Bar Bushing
The Sway Bar Bushing in Dodge Durango vehicles provides support and ensures that the sway bar fixed on the car remains intact and in order to perform the required duties of balancing the car and making it handle well the Sway Bar Bushing is very important. These bushings are designed to wear out since the sway bar flexible and when these bushings wear out the sway bar becomes loose and this leads to compromised safety and bad performance. Sway bar bushings need to be checked frequently for signs of wear and to be replaced often so as to maintain the optimal driving conditions. There might have been changes in the kinds of sway bar bushings utilised in the different models of Durango over the years that may be distinctive because of the features that they employ to encourage the improved functionality and safety of the car.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Durango Sway Bar Bushing at great affordable prices. Moreover, all genuine Dodge Durango Sway Bar Bushing come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Durango Sway Bar Bushing Parts Questions & Experts Answers
- Q: How to Remove a rear Stabilizer Bar and Stabilizer Bar bushing on a Dodge Durango?A: Lift the vehicle and support it firmly on jackstands. Unscrew the nuts from the sway bar kit link, and detach it from the bar. Remove the sway bar kit bracket fasteners and brackets. Take out the sway bar kit and remove the sway bar bushings from it. Check the bushings for damage, replacing those that are cracked, torn, or deteriorated. For installation, reverse the removal steps. Ensure all fasteners are tightened to the correct torque. Install the parking brake cable bracket and screw the lug nuts.
- Q: How Should the front Stabilizer Bar and Stabilizer Bar bushing Be Installed on Dodge Durango?A: Remove the upper nut from the sway bar kit link and separate it from the bar. Remove the lower nut from the link and separate it from the lower control arm. Remove the sway bar kit and rubber bushings. Inspect rubber bushings for wear and damage. Replace if cracked, torn, or deteriorated. Installation is the reverse of removal.
