Q: How Should the front Stabilizer Bar and Stabilizer Bar bushing Be Installed?
A: Remove the upper nut from the sway bar kit link and separate it from the bar. Remove the lower nut from the link and separate it from the lower control arm. Remove the sway bar kit and rubber bushings. Inspect rubber bushings for wear and damage. Replace if cracked, torn, or deteriorated. Installation is the reverse of removal.
Q: How to Remove a rear Stabilizer Bar and Stabilizer Bar bushing on a Dodge Durango?
A: Lift the vehicle and support it firmly on jackstands. Unscrew the nuts from the sway bar kit link, and detach it from the bar. Remove the sway bar kit bracket fasteners and brackets. Take out the sway bar kit and remove the sway bar bushings from it. Check the bushings for damage, replacing those that are cracked, torn, or deteriorated. For installation, reverse the removal steps. Ensure all fasteners are tightened to the correct torque. Install the parking brake cable bracket and screw the lug nuts.