Genuine Dodge Magnum Intake Manifold Temperature Sensor

Air Intake Temperature Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Intake Manifold Temperature Sensor found

  • Dodge Magnum Intake Manifold Temperature Sensor - 4606487AB
    Diagram for Dodge Magnum Intake Manifold Temperature Sensor - 4606487AB
    View related parts

    Dodge Magnum Sensor-Charge Air Temp

    Part Number: 4606487AB
    $63.83 MSRP: $96.10
    You Save: $32.27 (34%)
    ADD TO CART
    Product Specifications
    • Other Name: Sensor Charge Air Temp
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following Vehicles:
    • 2005-2008 Dodge Magnum | R/T AWD, R/T RWD, SE RWD, SRT8 RWD, SXT AWD, SXT RWD | 6 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1L

Dodge Magnum Intake Manifold Temperature Sensor

The IAT or Intake Manifold Temperature Sensor is useful for the Dodge Magnum as it controls the temperature of the air that enters the car's combustion chamber to enhance efficiency of the engine. This information is transmitted to the PCM which in turns alters the fuel injection timing to meet the right air/fuel ration given a specific operating condition. Intake Manifold Temperature Sensors for Dodge Magnum vehicles also come in two broad categories, they are, the Mass Air Flow (MAF) sensors and the Velocity Air Flow (VAF) sensors. These sensors are pre-calibrated in the factory for particular air flow ranges in order to support the performance modifications. Nevertheless, if the air flow exceeds the sensor's capability occasioned by additions, then the capability to take an accurate reading as well as the general performance of the engine may be compromised. It is highly critical that the Intake Manifold Temperature Sensor should be working correctly, otherwise, it can lead to such problems as stalling or an incorrect air/fuel ratio.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Magnum Intake Manifold Temperature Sensor at great affordable prices. Moreover, all genuine Dodge Magnum Intake Manifold Temperature Sensor come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Magnum Intake Manifold Temperature Sensor Parts Questions & Experts Answers

  • Q: Where is the IAT Sensor Located on Dodge Magnum?
    A: The Intake Manifold Temperature sensor is on the air intake duct of all engines. The exact location may vary depending on the engine, but the same sensor is used for all engines. To remove the sensor, unlock and disconnect the electrical connector by pushing the lock towards the harness and depressing the release tab. Note the orientation of the sensor before removing it. To install a new or old sensor, it must be correctly oriented. Grasp the sensor firmly and pull it straight out of the air intake duct. Installation is the reverse of removal.

Related Dodge Magnum Parts