What does the PCV valve control and where is it located on Chrysler Cirrus?

The reason the PCV valve is used is to control crankcase vapors that seep into the intake manifold. To make this possible, a spring-loaded valve that opens upon the vacuum produced in the intake manifold does it. For four-cylinder engines, it is located on the hose that connects the plenum with the intake manifold and valve cover; for V6 models, it is situated at the front of left-bank valve cover. To check if it's working, try removing this valve and starting the engine. If there is no hissing sound, look for a blocked hose or valve and replace it as necessary. Ensure that there are no contaminants or free movement of spring-loaded valves before replacing them. When installing it, ensure it matches your car type and has its closed end directed towards your vehicle's engine top.

Genuine Chrysler Cirrus PCV Valve

Position Crank Ventilation Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 PCV Valves found

View related parts
Chrysler Cirrus Valve-PCV
Part Number: MD183547
$50.22 MSRP: $73.75
You Save: $23.53 (32%)
ADD TO CART
Product Specifications
- Other Name: Valve PCV; PCV Valve
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chrysler Cirrus | LX, LXi | 6 Cyl 2.5L
View related parts
Chrysler Cirrus Valve-PCV
Part Number: 4315405
$9.56 MSRP: $12.17
You Save: $2.61 (22%)
ADD TO CART
Product Specifications
- Other Name: Valve, Crankcase Vent; PCV Valve
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995 Chrysler Cirrus | LX | 4 Cyl 2.4L
View related parts
Chrysler Cirrus Valve-PCV
Part Number: 4777240AC
Product Specifications
- Other Name: Valve PCV; PCV Valve
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2000 Chrysler Cirrus | LX, LXi | 4 Cyl 2.0L
View related parts
Chrysler Cirrus Valve-PCV
Part Number: 4777240
Product Specifications
- Other Name: Valve PCV
- Replaced by: 5175354AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2000 Chrysler Cirrus | LX, LXi | 4 Cyl 2.4L

Chrysler Cirrus PCV Valve

The PCV Valve utilized in Chrysler Cirrus vehicles is very important in improving the engine performance and minimize harms some byproducts in the form of emission. While this part directs partially burnt gases from the crankcase back to the combustion chamber thus making it easier to ignite the gases and also avoiding formation of oil sludge. Chrysler Cirrus PCV Valve depends on Intake manifold vacuum, which pinches of gas during idling, while during the time when the vehicle engine is enjoying its maximum RPMs it releases blow-by gases. In this model you might find that the Chrysler Cirrus models over the years implemented various types of PCV valves operating at dissimilar techniques of ventilation and of the efficiency of engines. A PCV valve common location is opposite the crankcase breather thus foolproof gas management is possible. PCV valve should be checked and refurbished often because a faulty PCV valve causes the oil to contaminate, more fuel to be used by the engine and expensive repairs to be done.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Cirrus PCV Valve at great affordable prices. Moreover, all genuine Chrysler Cirrus PCV Valve come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler Cirrus PCV Valve Parts Questions & Experts Answers

Valve-PCV
MD183547
Q: What does the PCV valve control and where is it located on Chrysler Cirrus?
A: The reason the PCV valve is used is to control crankcase vapors that seep into the intake manifold. To make this possible, a spring-loaded valve that opens upon the vacuum produced in the intake manifold does it. For four-cylinder engines, it is located on the hose that connects the plenum with the intake manifold and valve cover; for V6 models, it is situated at the front of left-bank valve cover. To check if it's working, try removing this valve and starting the engine. If there is no hissing sound, look for a blocked hose or valve and replace it as necessary. Ensure that there are no contaminants or free movement of spring-loaded valves before replacing them. When installing it, ensure it matches your car type and has its closed end directed towards your vehicle's engine top.