How Should I Inspect and Replace Steel Brake Lines on Chrysler PT Cruiser?

During inspection, when the vehicle is raised on jackstands, thoroughly examine the rubber hoses connecting the steel brake lines to the front and rear brake assemblies for any signs of damage, such as cracks, chafing, leaks, blisters, or other issues. Utilize a light and mirror for a comprehensive check. If any hose shows the mentioned conditions, it should be replaced immediately. To replace a flexible hose, clean the hose fittings, then disconnect the metal brake line from the hose fitting using a flare-nut wrench, being cautious not to damage the frame bracket or line. If the fitting is corroded, apply penetrating oil and allow it to soak before retrying. Remove the brake hose from the bracket, and if it's a rear brake hose on a drum-brake model, use a flare-nut wrench to loosen the line fitting at the wheel cylinder and remove the hose. For hoses attached to the caliper with a banjo bolt, unscrew the bolt and remove the hose, replacing the sealing washers on both sides of the fitting. Attach the new brake hose to the caliper or wheel cylinder, ensuring to use new sealing washers and tightening the banjo bolt to the specified torque. Insert the other end of the new hose through the bracket or attach the fitting/bracket to the vehicle, ensuring the hose isn't kinked or twisted, then fit the metal line to the hose (or hose fitting) and tighten the hose bracket and brake tube fitting nut securely. Check to ensure the hose doesn't make contact with suspension or steering components during vehicle operation. After installation, check the master cylinder fluid level, add fluid if needed, bleed the brakes, and thoroughly test brake operation before normal use. When replacing brake lines, use appropriate steel brake lines, not copper tubing, and ensure correct parts are used. Prefabricated brake lines with flared tube ends and fittings can be used, and if bending a line is necessary, use a tubing bender to prevent kinks. During installation, support the new line securely in brackets and provide sufficient clearance between moving or hot components. Tighten fittings securely. After installation, check the master cylinder fluid level, bleed the brakes, and thoroughly test brake operation before resuming normal use.

Genuine Chrysler PT Cruiser Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

68 Brake Lines found

View related parts
Chrysler PT Cruiser Hose Brake
Part Number: 4860068AC
$55.84 MSRP: $82.25
You Save: $26.41 (33%)
ADD TO CART
Product Specifications
- Replaced by: 4860068AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler PT Cruiser | Base, Base Convertible, GT, GT Convertible, Limited, Touring, Touring Convertible | 4 Cyl 2.4L
View related parts
Chrysler PT Cruiser Line-Brake
Part Number: 5085523AC
$42.49 MSRP: $43.60
You Save: $1.11 (3%)
ADD TO CART
Product Specifications
- Other Name: Hose Brake
- Replaced by: 5085523AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2007 Chrysler PT Cruiser | Base, Base Convertible, GT, GT Convertible, Limited, Touring, Touring Convertible | 4 Cyl 2.4L
View related parts
Chrysler PT Cruiser Line-Brake
Part Number: 5085523AD
$42.49 MSRP: $43.60
You Save: $1.11 (3%)
ADD TO CART
Product Specifications
- Other Name: Hose Brake; Brake Hose, Flex Hose
- Position: Driver Side
- Replaces: 5085523AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2009 Chrysler PT Cruiser | Base, Base Convertible, GT, GT Convertible, LX, Limited, Touring, Touring Convertible | 4 Cyl 2.4L
View related parts
Chrysler PT Cruiser Line-Brake
Part Number: 4860069AB
$55.84 MSRP: $82.25
You Save: $26.41 (33%)
ADD TO CART
Product Specifications
- Other Name: Hose Brake
- Replaced by: 4860069AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler PT Cruiser | Base, Base Convertible, GT, GT Convertible, Limited, Touring, Touring Convertible | 4 Cyl 2.4L
View related parts
Chrysler PT Cruiser Line-Brake
Part Number: 4860083AD
$133.04 MSRP: $199.00
You Save: $65.96 (34%)
ADD TO CART
Product Specifications
- Other Name: Hose Brake
- Replaced by: 4860083AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chrysler PT Cruiser | Base, Base Convertible, GT, GT Convertible, Limited, Touring, Touring Convertible | 4 Cyl 2.4L
View related parts
Chrysler PT Cruiser Line-Brake
Part Number: 4860082AC
$160.99 MSRP: $241.00
You Save: $80.01 (34%)
ADD TO CART
Product Specifications
- Other Name: Hose Brake
- Replaced by: 4860082AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler PT Cruiser | Base, Base Convertible, GT, GT Convertible, Limited, Touring, Touring Convertible | 4 Cyl 2.4L
View related parts
Chrysler PT Cruiser Line-Brake
Part Number: 4860082AE
$160.99 MSRP: $241.00
You Save: $80.01 (34%)
ADD TO CART
Product Specifications
- Other Name: Hose Brake
- Replaced by: 4860082AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chrysler PT Cruiser | Base, Base Convertible, GT, GT Convertible, Limited, Touring, Touring Convertible | 4 Cyl 2.4L
View related parts
Chrysler PT Cruiser Line-Brake
Part Number: 4860068AD
$55.84 MSRP: $82.25
You Save: $26.41 (33%)
ADD TO CART
Product Specifications
- Other Name: Hose Brake
- Replaced by: 4860068AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Chrysler PT Cruiser | Base, Base Convertible, GT, GT Convertible, Limited, Touring, Touring Convertible | 4 Cyl 2.4L
View related parts
Chrysler PT Cruiser Line-Brake
Part Number: 4860068AE
$55.84 MSRP: $82.25
You Save: $26.41 (33%)
ADD TO CART
Product Specifications
- Other Name: Hose Brake; Brake Hose, Flex Hose
- Position: Passenger Side
- Replaces: 4860068AC, 4860068AD, 68031608AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2010 Chrysler PT Cruiser | Base, Base Convertible, Classic, GT, GT Convertible, LX, Limited, Touring, Touring Convertible | 4 Cyl 2.4L
View related parts
Chrysler PT Cruiser Line-Brake
Part Number: 4860069AC
$55.84 MSRP: $82.25
You Save: $26.41 (33%)
ADD TO CART
Product Specifications
- Other Name: Hose Brake
- Replaced by: 4860069AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Chrysler PT Cruiser | Base, Base Convertible, GT, GT Convertible, Limited, Touring, Touring Convertible | 4 Cyl 2.4L
View related parts
Chrysler PT Cruiser Line-Brake
Part Number: 4860069AD
$55.84 MSRP: $82.25
You Save: $26.41 (33%)
ADD TO CART
Product Specifications
- Other Name: Hose Brake; Brake Hose, Flex Hose
- Position: Driver Side
- Replaces: 4860069AB, 4860069AC, 68031609AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2010 Chrysler PT Cruiser | Base, Base Convertible, Classic, GT, GT Convertible, LX, Limited, Touring, Touring Convertible | 4 Cyl 2.4L
View related parts
Chrysler PT Cruiser Tube-Brake
Part Number: 5017684AA
$72.05 MSRP: $91.69
You Save: $19.64 (22%)
ADD TO CART
Product Specifications
- Other Name: Tube Brake Right Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chrysler PT Cruiser | Base, Base Convertible, Limited, Touring, Touring Convertible | 4 Cyl 2.4L
View related parts
Chrysler PT Cruiser Line-Brake
Part Number: 5085387AE
$11.40 MSRP: $14.50
You Save: $3.10 (22%)
ADD TO CART
Product Specifications
- Other Name: Tube Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Chrysler PT Cruiser | Base, Base Convertible, Classic, GT, GT Convertible, Limited, LX, Touring, Touring Convertible | 4 Cyl 2.4L
View related parts
Chrysler PT Cruiser Tube-Brake
Part Number: 5143266AB
$6.75 MSRP: $7.80
You Save: $1.05 (14%)
ADD TO CART
Product Specifications
- Other Name: Tube Brake Right Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2009 Chrysler PT Cruiser | GT, GT Convertible, Limited, Touring, Touring Convertible | 4 Cyl 2.4L
View related parts
Chrysler PT Cruiser Line-Brake
Part Number: 4860082AF
$155.88 MSRP: $241.00
You Save: $85.12 (36%)
ADD TO CART
Product Specifications
- Other Name: Hose Brake; Brake Hose, Flex Hose
- Position: Passenger Side
- Replaces: 68031610AA, 4860082AE, 4860082AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2010 Chrysler PT Cruiser | Base, Base Convertible, Classic, GT, GT Convertible, LX, Limited, Touring, Touring Convertible | 4 Cyl 2.4L
View related parts
Chrysler PT Cruiser Line-Brake
Part Number: 5085389AC
$17.04 MSRP: $24.60
You Save: $7.56 (31%)
ADD TO CART
Product Specifications
- Other Name: Tube Brake
- Replaced by: 5085389AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Chrysler PT Cruiser | Base, Base Convertible, GT, GT Convertible, Limited, Touring, Touring Convertible | 4 Cyl 2.4L
View related parts
Chrysler PT Cruiser Line-Brake Booster
Part Number: 4509900AB
$13.62 MSRP: $17.34
You Save: $3.72 (22%)
ADD TO CART
Product Specifications
- Other Name: Hose Brake Booster
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001 Chrysler PT Cruiser | Base | 4 Cyl 2.4L
View related parts
Chrysler PT Cruiser Line-Brake
Part Number: 5085522AD
$37.86 MSRP: $48.20
You Save: $10.34 (22%)
ADD TO CART
Product Specifications
- Other Name: Hose Brake; Brake Hose, Flex Hose
- Position: Passenger Side
- Replaces: 5085522AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2009 Chrysler PT Cruiser | Base, Base Convertible, GT, GT Convertible, LX, Limited, Touring, Touring Convertible | 4 Cyl 2.4L
View related parts
Chrysler PT Cruiser Line-Brake
Part Number: 4860083AE
$155.88 MSRP: $199.00
You Save: $43.12 (22%)
ADD TO CART
Product Specifications
- Other Name: Hose Brake; Brake Hose, Flex Hose
- Position: Driver Side
- Replaces: 4860083AD, 68031611AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Chrysler PT Cruiser | Base, Base Convertible, Classic, GT, GT Convertible, LX, Limited, Touring, Touring Convertible | 4 Cyl 2.4L
View related parts
Chrysler PT Cruiser Line-Brake
Part Number: 5085393AC
$6.55 MSRP: $7.55
You Save: $1.00 (14%)
ADD TO CART
Product Specifications
- Other Name: Tube Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2009 Chrysler PT Cruiser | Base, Base Convertible, GT, GT Convertible, Limited, LX, Touring, Touring Convertible | 4 Cyl 2.4L

| Page 1 of 4 |Next >

1-20 of 68 Results

Chrysler PT Cruiser Brake Line

The Brake Line in Chrysler PT Cruiser involves the path through which the brake fluid is supplied to the brake caliper pistons so as to ensure that hydraulic brakes in the automobile are effectively applied. Metal brake lines also give way to corrosion and impact and this is followed by the formation of fluid leakage and loss of hydraulic pressure. Brake hoses tend to wear out physically and mechanically which has a possibility of damaging the brakes. When it is time for replacement there are pre bent brake line kits and direct replacement brake hoses in the market with reasonable corrosion protection along with the right fittings for complete replacement. Converting to stainless steel braided brake lines can help in enhancing the brake pedal response and especially for those special occasions when you are behind the wheel on the race track.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler PT Cruiser Brake Line at great affordable prices. Moreover, all genuine Chrysler PT Cruiser Brake Line come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler PT Cruiser Brake Line Parts Questions & Experts Answers

Line-Brake
4509781AG
Q: How Should I Inspect and Replace Steel Brake Lines on Chrysler PT Cruiser?
A: During inspection, when the vehicle is raised on jackstands, thoroughly examine the rubber hoses connecting the steel brake lines to the front and rear brake assemblies for any signs of damage, such as cracks, chafing, leaks, blisters, or other issues. Utilize a light and mirror for a comprehensive check. If any hose shows the mentioned conditions, it should be replaced immediately. To replace a flexible hose, clean the hose fittings, then disconnect the metal brake line from the hose fitting using a flare-nut wrench, being cautious not to damage the frame bracket or line. If the fitting is corroded, apply penetrating oil and allow it to soak before retrying. Remove the brake hose from the bracket, and if it's a rear brake hose on a drum-brake model, use a flare-nut wrench to loosen the line fitting at the Wheel Cylinder and remove the hose. For hoses attached to the caliper with a banjo bolt, unscrew the bolt and remove the hose, replacing the sealing washers on both sides of the fitting. Attach the new brake hose to the caliper or wheel cylinder, ensuring to use new sealing washers and tightening the banjo bolt to the specified torque. Insert the other end of the new hose through the bracket or attach the fitting/bracket to the vehicle, ensuring the hose isn't kinked or twisted, then fit the metal line to the hose (or hose fitting) and tighten the hose bracket and brake tube fitting nut securely. Check to ensure the hose doesn't make contact with suspension or steering components during vehicle operation. After installation, check the master cylinder fluid level, add fluid if needed, bleed the brakes, and thoroughly test brake operation before normal use. When replacing brake lines, use appropriate steel brake lines, not copper tubing, and ensure correct parts are used. Prefabricated brake lines with flared tube ends and fittings can be used, and if bending a line is necessary, use a tubing bender to prevent kinks. During installation, support the new line securely in brackets and provide sufficient clearance between moving or hot components. Tighten fittings securely. After installation, check the master cylinder fluid level, bleed the brakes, and thoroughly test brake operation before resuming normal use.