How to check and adjust Ignition Switch on Dodge Grand Caravan?

The automatic transaxle shift/ignition lock is a cable linkage system which couples the floor type shift lever with the ignition switch on the steering column, securing shift lever in the PARK position when the ignition switch is in LOCK or ACCESSORY position. In Off or Run position of the key, the shift lever can be manipulated. It also disallows the key in turning to Off or Accessory mode if the shifter is not engaged properly to Park mode. To check the system, shift the lever to 'Park', turn the knob pushbutton fully up so that the ignition key can rotate in a clock wise position to the Lock symbol. Hopefully engagement of the shift lever to Drive position should deter the key from advancing to Lock position. Unlocking the shift lever should be done with the key in Off/Run position and cannot be done if the key is in the Lock position. If the system is not working properly, corrections may be required from time to time. Unless the ignition switch becomes locked while the shift lever is in Park, turn the ignition to Accessory, then pull the shift knob and taking of the trim plate. Green plunger must be in the upper position and the cable slug must engage the interlock lever. While keeping the ignition switch in Accessory, it is then necessary to loosen the nut on the interlock lever to enable correct positioning of the interlock before tighting the nut to the required specification. Restart the system after uninstalling them in a reverse sequence and check for the results after adjustments.

Genuine Dodge Grand Caravan Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Ignition Switches found

View related parts
Dodge Grand Caravan Switch-Ignition
Part Number: 4671324
$77.74 MSRP: $119.00
You Save: $41.26 (35%)
ADD TO CART
Product Specifications
- Other Name: Switch Ignition; Ignition Switch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2000 Dodge Grand Caravan | Base, ES AWD, ES FWD, LE AWD, LE FWD, SE AWD, SE FWD, Sport AWD | 6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.8L
- 1997 Dodge Grand Caravan | Base, LE AWD, LE FWD, SE AWD, SE FWD | 4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Dodge Grand Caravan SWITCHPKG-Ignition
Part Number: 4797401
$4.50 MSRP: $189.00
You Save: $184.50 (98%)
ADD TO CART
Product Specifications
- Other Name: Switch, Ignition Starter
- Replaced by: 4797401AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1995 Dodge Grand Caravan | Base, LE AWD, LE FWD, SE AWD, SE FWD | 6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Dodge Grand Caravan Switch-Ignition
Part Number: 4685719AB
$60.83 MSRP: $91.60
You Save: $30.77 (34%)
ADD TO CART
Product Specifications
- Other Name: Switch Ignition
- Replaced by: 4685719AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Dodge Grand Caravan | C/V, EL, ES AWD, ES FWD, EX, SE, Sport AWD, Sport FWD, SXT AWD, SXT FWD | 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Dodge Grand Caravan Switch-Ignition
Part Number: 4685719AE
$60.83 MSRP: $91.60
You Save: $30.77 (34%)
ADD TO CART
Product Specifications
- Other Name: Switch Ignition
- Replaced by: 4685719AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Grand Caravan
View related parts
Dodge Grand Caravan Switch-Engine START/STOP
Part Number: 1FU931X9AC
$27.65 MSRP: $40.75
You Save: $13.10 (33%)
ADD TO CART
Product Specifications
- Other Name: Button Engine Start/Stop; Ignition Switch, Power Switch, Start Button
- Replaces: 1FU931X9AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2016 Dodge Grand Caravan | C/V, Crew, Express, LUX, Mainstreet, R/T, SE, SXT | 6 Cyl 3.6L
View related parts
Dodge Grand Caravan Switch Ignition & Starter
Part Number: 3747529
Product Specifications
- Other Name: Switch, Ignition & Starter; Ignition Switch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987-1989 Dodge Grand Caravan | 4 Cyl 2.2L, 4 Cyl 2.5L, 4 Cyl 2.6L, 6 Cyl 3.0L
View related parts
Dodge Grand Caravan Switch-Ign & Starter
Part Number: 3747882
Product Specifications
- Other Name: Switch, Ignition & Starter; Cylinder & Key, Ignition Switch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987-1990 Dodge Grand Caravan | 4 Cyl 2.2L, 4 Cyl 2.5L, 4 Cyl 2.6L, 6 Cyl 3.0L, 6 Cyl 3.3L
View related parts
Dodge Grand Caravan Ignition & Starter
Part Number: 4221201
Product Specifications
- Other Name: Switch, Ignition & Starter; Cylinder & Key, Ignition Switch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987-1990 Dodge Grand Caravan | 4 Cyl 2.2L, 4 Cyl 2.5L, 4 Cyl 2.6L, 6 Cyl 3.0L, 6 Cyl 3.3L
View related parts
Dodge Grand Caravan None-Ignition Lock Cylinder
Part Number: 5257137
Product Specifications
- Other Name: Driver, Ignition Cylinder, Push to Lock
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-1995 Dodge Grand Caravan | Base, LE AWD, LE FWD, SE AWD, SE FWD | 4 Cyl 2.5L, 6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.8L

Dodge Grand Caravan Ignition Switch

In Dodge Grand Caravan vehicles the Ignition Switch plays a significant role in the ignition and charging systems that are responsible for starting up the engine and the associated systems consisting of parts like radio, and power windows. To start the engine the driver needs to rotate the Ignition Switch with a key, button or remote which signals the vehicle's computer to activate the starter solenoid and the ignition and so the engine will start. In the past years the Dodge Grand Caravan models have incorporated various styles of Ignition Switch that ranged from mechanical key ignition to the most advanced keyless ignitions buttons with push buttons. The former requires a correct key to be inserted into the system while the latter still requires a transponder signal to start up the system. However, the ignorance of the Grand Caravan's problems and Ignition Switch evolvement are undeniable, but nonetheless, the switch's purpose has remained fixed, whereas the fixes are relatively simple due to the plug-and-play segregation designed for the Dodge Grand Caravan models.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Grand Caravan Ignition Switch at great affordable prices. Moreover, all genuine Dodge Grand Caravan Ignition Switch come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Grand Caravan Ignition Switch Parts Questions & Experts Answers

Switch-Ignition
4685719AB
Q: How to check and adjust Ignition Switch on Dodge Grand Caravan?
A: The automatic transaxle shift/ignition lock is a cable linkage system which couples the floor type shift lever with the ignition switch on the steering column, securing shift lever in the PARK position when the ignition switch is in LOCK or ACCESSORY position. In Off or Run position of the key, the shift lever can be manipulated. It also disallows the key in turning to Off or Accessory mode if the shifter is not engaged properly to Park mode. To check the system, shift the lever to 'Park', turn the knob pushbutton fully up so that the ignition key can rotate in a clock wise position to the Lock symbol. Hopefully engagement of the shift lever to Drive position should deter the key from advancing to Lock position. Unlocking the shift lever should be done with the key in Off/Run position and cannot be done if the key is in the Lock position. If the system is not working properly, corrections may be required from time to time. Unless the ignition switch becomes locked while the shift lever is in Park, turn the ignition to Accessory, then pull the shift knob and taking of the trim plate. Green plunger must be in the upper position and the cable slug must engage the interlock lever. While keeping the ignition switch in Accessory, it is then necessary to loosen the nut on the interlock lever to enable correct positioning of the interlock before tighting the nut to the required specification. Restart the system after uninstalling them in a reverse sequence and check for the results after adjustments.